Syringe Infusion Pump

Features
1) Infusion rate and total volume can be set by user. 2) Alarms for infusion pipe occlusion, syringe fall-off, communication abnormal, low battery. 3) Bright, alarm volume and range of pressure alarm are adjustable. 4) Quick feed function, convenient for supplying medicine quickly and instantaneously. 5) Enter KVO mode after infusion completed. 6) The system will give prompt signal when there is no operation at power-on state. 7) Built-in rechargeable battery provides such functions as auto-switch power supply and auto-charge. 8) Display parameters with large screen, and give prompt information with visual, auditory and character signal, which is convenient for medical persons to operate. 9) The device can equipped with disposable syringe (CNS), and accuracy can be ensured by adjusting parameters. 

Performance
1) Specification requirement for syringe: 10ml/20ml/30ml/50ml (CNS) 2) Infusion rate: 10ml 0.1ml/h-100ml/h 20ml 0.1ml/h-200ml/h 30ml 0.1ml/h-300ml/h 50ml 0.1ml/h-500ml/h 3) Rate of quick feed: 10ml 100ml/h 20ml 200ml/h 30ml 300ml/h 50ml 500ml/h 4) Accumulated volume display: 0ml-999.9ml 5) Accuracy: ±3% 6) Pressure range for occlusion alarm: Three grades are adjustable: Low: 40KPa ± 16KPa Middle: 70KPa ± 30KPa High: 100KPa± 35KPa 7) KVO rate: 0.1ml/h~5ml/h, adjustable 8) Safety classification: Class equipment, internally powered type BF 9) Alarm function: 1 At non-operated state 2 Near empty 3 Empty, enter KVO mode 4 Syringe fall-off 5 Occlusion 6 Pressure failure 7 Motor failure 8 Low battery 9 Communication abnormal 10) Maximal power consumption: 20VA~30VA, the device can continuously work for at least two hours with the injection rate of 5ml/h or 500ml/h after fully charged. 11) Power supply: AC100~240V 50/60Hz 12) Battery: rechargeable lithium battery, 7.4V, 3500mAh 13) Working environment: Temperature: +5~40; Atmospheric pressure: 860hPa~1060h; Relative humidity: 20%~90%; no strong vibration and no corrosive gas. 14) Storage environment: Temperature: -20~+55; Relative humidity: ≤90%, no condensation; No corrosive gas and well-ventilated Accessories A bracket A power cord A user manual Two fuses

Function
1) Flow control with high accuracy ensures optimum therapeutic effect. 2) Be compatible with most standard IV Sets. 3) New IV set provided by user can be calibrated by suppliers, and infusion parameters can be input into the pump, which ensures accuracy. 4) 2.8'''' TFT-LCD. 5) Operate with keys. 6) Residual infusion time can be displayed during infusing. 7) With reminder function for starting infusion. 8) Alarm for occlusion, air bubble, door open and motor failure, etc. 9) Threshold for pressure alarm can be adjusted by medical personnel. 10) Accompanying IV-set clamp prevents liquid flowing freely when the pump door opens accidentally. 11) A.B.S——ANTI BOLUS system prevents instantaneous high-dose injection from the sudden obstruction disappearing. 12) Stop infusing automatically during alarm(except for "NEAR END", "KVO", and "LOW BATTERY" alarms). 13) Power supply: AC/DC and built-in lithium battery. 14) Infusion pump can be mounted on infusion pole in many directions by the versatile bracket. 15) Infusion parameters can be saved after power off.


3 Performance Type: volumetric infusion pump Infusion rate: 1~699mL/h, increment: 1mL/h Total volume: 1~9999mL, increment: 1mL Accuracy: ±5%(use the IV set calibrated) Display information: flow rate, total volume, accumulated infusion volume, residual time Safety classification: class I,type BF applied part Waterproof degree: IPX2 Working mode: continuous working Alarm functions: near end, KVO state, low battery, no power, pressure failure, door failure, air bubble, door open, occlusion, infusion reminder and motor failure. Air bubble detector: ultrasonic TFT: 2.8'''' KVO rate: 1mL/h(can not be adjusted) Sensitivity for pressure sensor: 1~3 grades(it can be adjusted by professional medical personnel) Power supply: AC:100~240V, 50/60Hz Rechargeable Li-polymer battery, 7.4 V/5000mAh Special safety measures: Accompanying IV-set clamp prevents liquid flowing freely when the pump door opens accidentally. Air bubble detector with high accuracy prevents air bubbles from entering patient’s body. Pressure sensor prevents occlusion for IV set. A.B.S system, when the high-voltage occlusion alarm appears, stop infusing immediately, and eliminate the pressure of the IV set automatically, which prevents instantaneous high-dose injection from the sudden obstruction disappearing. Infusion parameters during infusing are protected against being changed arbitrarily. With password protection function(in system parameter setting and IV set type interface). 4 Accessories A power cord A user Manual