VD Bio Medisystems

The Bionet Oxy9Wave Neonatal Pulse Oximeter is a cutting-edge medical device designed for precise monitoring of oxygen saturation levels and pulse rates in neonates and infants. This advanced pulse oximeter offers a range of features to ensure accurate readings and ease of use in neonatal care settings.

FEATURES :-

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

The Bionet Oxy9Wave Neonatal Pulse Oximeter is a cutting-edge medical device designed for precise monitoring of oxygen saturation levels and pulse rates in neonates and infants. This advanced pulse oximeter offers a range of features to ensure accurate readings and ease of use in neonatal care settings.

FEATURES

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

The Bionet Oxy9Wave Neonatal Pulse Oximeter is a cutting-edge medical device designed for precise monitoring of oxygen saturation levels and pulse rates in neonates and infants. This advanced pulse oximeter offers a range of features to ensure accurate readings and ease of use in neonatal care settings.

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

• PARAMETERS: SpO2, Pulse Rate
• Includes In-Hospital Standard Mode & Non-Hospital Homecare & Sleep Study Modes
• Continuous SpO2 & Pulse Rate Monitoring on Infant/Adult Patients
• Advanced Signal Processing Under Low Perfusion & Patient Motion
• SatSeconds Alarm Management for Enhanced SpO2 Monitoring Process
• Quicker Response to Respiratory Status Changes .

Covidien Nellcor™ Bedside SpO2 Patient Monitoring System with Homecare Mode provides a truly versatile solution allowing continuous SpO2 and pulse rate monitoring in both clinical and non-hospital settings. Advanced performance characteristics ensure consistency and exceptional accuracy for the fast and efficient respiratory status assessment.

Advanced Technology
The PM100N Monitor is designed with the implementation of the latest Nellcor™ signal processing technology which is proven to provide superior measurement capabilities even under difficult monitoring conditions. It ensures accurate assessment of patient SpO2 and pulse rate status at all times and under various degrees signal interference including low perfusion, patient motion or noise, avoiding dropouts or delays. The in-hospital Standard Monitor Mode provides real-time patient respiratory status information including continuous SpO2 and pulse rate monitoring, plethysmographic waveforms and pulse amplitude. It features 1% to 100% SpO2 and 20 to 250 bpm measurement range on both neonate and adult patients. Moreover, the Monitor comprises a top-of-the-line technology that ensures a quicker response to the changes in patients’ oxygenation and pulse rate allowing for the early detection of respiratory complications and, therefore, a sooner intervention.

Non-Hospital Applications
The Nellcor™ PM100N SpO2 Monitor comprises two specialty modes for a non-hospital application. The Homecare Mode is configured for the simplified monitoring process facilitated by caregivers. The Sleep Study Mode is configured for simplified monitoring during sleep studies. It includes an automatic reduced screen backlighting function as well as silenced alarms function to minimize the disturbances to sleeping patients. Both modes are password protected to ensure a safe utilization by non-clinical users and preventing alarm settings modification. PM100N is only bedside monitor on the market that provides corresponding modes for hospital and non-hospital applications meeting the IEC 60601-1-11 standards for home health equipment compliance.

AlarmAlarm IndicatingAudible and visual alarms for high/low saturation and pulse rate, low battery, sensor disconnect, sensor offDimensions & WeightHeight3.23"Length6.10"Weight3 lbsWidth10.04"DisplayDisplay TypeColorDisplaying DataReal-time SpO2 and pulse rate, plethysmographic waveforms and pulse amplitudeOther Info DisplayingPulse amplitude indicator. Visual indicators: Pulse search, audible alarms silenced or off, interference indicator, battery charging, and SatSeconds alarm management clock, pleth wave formEnvironmentalSafe Operating Humidity Level15% to 93% noncondensingSafe Operating Temperature Range5 °C to 40 °C (41 °F to 104 °F)Safe Storage Temperature-20 °C to 60 °C (-4 °F to 140 °F)PowerTypeLi-Ion BatteryPulse Rate MeasurementAccuracy20 to 250 bpm ± 3 digitsDisplay Range20 to 250 bpmMeasurement range20 to 250 bpm

 

SpO2 MeasurementAccuracy70% to 100% ± 2 digits; Adult and neonate low sat: 60% to 80% ± 3 digitsDisplay range1% to 100%Measurement Range1% to 100%

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 Week
• Packaging Details: Box Packing

Nellcor™ PM10N Handheld Pulse Oximeter

The Nellcor PM10N Handheld Pulse Oximeter is primarily used for patient monitoring in hospitals, care facilities and in the home. However, due to its handy size, it can also be excellently used for mobile monitoring, such as during patient transport.

In addition, the portable pulse oximeter has advanced signal processing technology and enables reliable operation and accurate measurement results even in difficult monitoring situations, such as low perfusion or patient movement. Due to the different modes, the device can be used in a variety of ways, such as for sleep monitoring (in sleep mode) or in the home environment (in homecare mode).

The pulse oximeter is compatible with all OxiMax sensors or Nellcor sensors equipped with OxiMax technology and, with the appropriate sensor, enables uncomplicated and reliable monitoring of oxygen saturation and pulse rate in adults, children and newborns.

Product Details

• Nellcor™ PM10N Handheld Pulse Oximeter
• Portable, lightweight and handy handheld device
• Enables spot check measurements for both newborns, children and adults
• Real-time display of SpO2 and pulse rate values
• Measuring range (SpO2): 1 % to 100 %
• Measuring range (pulse): 20 to 250 beats/minute
• SatSeconds alarm management
• Pleth curve
• Luminous bars
• Suitable for sleep monitoring
• Modes: standard, homecare and sleep mode
• Tabular trend dataColoured 3" TFT LCD display (easy to read)
• Advanced signal processing technology, resulting in reliable operation (even with low perfusion or a restless patient)
• Data storage capacity: 80 hours
• Supports trend data downloads via mini USB connection to a PC
• Data analysed: date, time, alarm, SpO2 and pulse rate
• Compatibility with all Nellcor sensors that feature OxiMax technology
• Alarm: audible and visual
• With adjustable alarm limits
• Dimensions (H x W x D): 15.6 x 7 x 3.2 cm
• Weight (incl. batteries): 274 g
• Delivery: 1 pulse oximeter, including SpO2 sensor DS100A for adults, batteries and instruction manual

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

Technical Specifications:

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Features:

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers

 

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 Week
• Packaging Details: BOX PACKING

Technical Specifications:

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Features:

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers

 

Additional Information:

• Production Capacity: 50
• Delivery Time: 1 WEEK
• Packaging Details: BOX PACKING

Introduction CMS5100 Patient Monitor is a feature-rich monitoring device that can be applied to adults, pediatric and neonate. User can choose different measurement parameters according to different needs. The patient monitor can monitor NIBP, SpO2 and PR. It integrates the function of parameter measuring and displaying into a compact, lightweight patient monitor, which is suitable for all levels of hospitals, community medical and home use.

Features
1)Be applicable for NIBP and SpO2 monitoring of adult, pediatric and neonate of all ages, easy to operate, high cost-effective; 2)Be applicable for medicine, surgery, operating room, ICU/CCU, emergency room, obstetrics and gynecology, pediatrics; 3)Compact and flexible appearance, easy for carrying and suitable for indoor and outdoor (in ambulance) monitoring; 4)Built-in rechargeable lithium polymer battery, ensuring uninterrupted monitoring; 5)Perfect menu design, user-friendly interface; 6)Display the measurement result of SYS, DIA, MAP, SpO2, PR and bar graph by the display screen of high-brightness digital tube; 7)2.8'''' (320×240) true color TFT LCD screen, displays the information of time, SpO2 Plethysmogram, alarm condition, trend graph, list and system settings, etc.; 8)Visual and audible alarm for SYS, DIA, MAP, SpO2 and PR, and upper and lower limit of alarm can be set as necessary; 9)Independent nonvolatile memory, storage for up to 2,000 groups of NIBP data and 78,000 groups of SpO2 data; 10)Convenient and quick in reviewing measurement data, available for reviewing the NIBP trend graph of 24 hours and SpO2 trend graph of 22 hours. 



Performance
1 NIBP Using Oscillometry technology, also called Oscillography technology to measure the blood pressure.
1)Measurement mode: manual/auto/continuous
2)Measurement interval in auto mode: 1, 2, 3, 4, 5, 5×n(n=2, 3, 4...51) min.
3)Resolution: 1 mmHg
4)Accuracy: max mean error: ±5 mmHg; max standard deviation: 8 mmHg.
5)Overpressure protection: dual protection for both software and hardware
6)Others: reset, self-testing and accuracy testing of static pressure
7)Measurement range: Adult SYS 40 mmHg~270 mmHg MAP 20 mmHg~235 mmHg DIA 10 mmHg~215 mmHg Pediatric: SYS 40 mmHg~200 mmHg MAP 20 mmHg~165 mmHg DIA 10 mmHg~150 mmHg Neonate: SYS 40 mmHg~135 mmHg MAP 20 mmHg~110 mmHg DIA 10 mmHg~100 mmHg 2 SpO2 Using Photoelectric Oxyhemoglobin Inspection Technology combined with Capacity Pulse Scanning & Recording Technology to measure the saturation of blood oxygen.

1)Measurement range: 0 %~100 %
2)Alarm range: 0 %~100 %
3)Resolution: 1 %
4)Accuracy: 70 %~100 %, ±2 %; below 70 % unspecified. 3 PR Using Photoelectric Oxyhemoglobin Inspection Technology combined with Capacity Pulse Scanning & Recording Technology to measure the pulse rate.
1)Measurement range: 25 bpm~250 bpm
2)Alarm range: 25 bpm~250 bpm
3)Resolution: 1 bpm 4)Accuracy: ±2 bpm or ±2 %, whichever is greater
4 Safety and Power supply
1)Power supply: rated voltage: ~220 V, rated power: 50 Hz
2)Safety classification: Class I equipment, type BF defibrillation-proof applied part

Additional Information:

• Item Code: 5100
• Production Capacity: na
• Delivery Time: 3 DAY
• Packaging Details: Premium Box Packaging Dimension:-190(L) ×162(W) ×240(H) mm · Dimension for packaging:-402(L) ×228(W) ×320(H) mm ·

Product Description

Nellcor SpO2 Pulse Oximeter Bedside Specification :

• The Nellcor Bedside SPO2 Pulse Oximeter provides at a glance access to real-time patient respiratory status information including continuous SpO2 and pulse rate monitoring and trending data
• The compact monitor can be placed at the patients bedside or easily transported using the convenient built-in handle
• The device features a password protected system to ensure safe utilization by non-clinical users and the ability to conveniently download data for further data analysis
• The pulse oximeter supports the latest Nellcor digital signal processing technology for accurate and reliable readings even during low perfusion, motion, and other forms of signal interference, as well as SatSeconds alarm management to help distinguish meaningful alarms from transient events
• The device has a 96-hour trend memory with data captured every four seconds for quick review of changes in patient status
• The device is engineered with simple, intuitive operation and space-saving design
• The oximeter is equipped with distinctive digital signal processing technology
• The device also features a variable pitch beep tone which enables clinicians to hear point by point changes in SpO2
• The pulse oximeter supports an easy to use jog dial for simple navigation and control of the display and monitoring system functions
• It is capable of displaying plethysmographic waveforms, pulse amplitude, and current measured SpO2 and pulse rate

 

Technical Specification :

• SpO2 : 1% to 100%
• Pulse rate : 20 to 250 beats per minute (bpm)
• Pulse amplitude : 0.03% to 20%
• Power requirements : 100 to 240 VAC, 50/60 Hz, 45 VA
• Fuse rating : Fast acting 2 A 32VAC/DC
• Battery Type : Lithium ion
• Battery capacity : Minimum of five hours using new, fully charged battery with no alarms; optional 10-hour battery
• Operating Humidity : 15% to 93% non condensing
• Operating Altitude : -170 m to 4877 m (-557 ft to 16000 ft)

Additional Information:

• Item Code: CovidienNellcorePulseOximeter
• Production Capacity: 20
• Delivery Time: 3

Product Description

Convenient, handheld pulse oximeter that is ideal for spot-checks or continuous monitoring in various healthcare and home use settings.

• The monitoring system includes a vivid 3-inch color LCD screen, and connectivity to analytic tools and patient management systems.
• Small, lightweight, ergonomic handheld monitor for continuous and spot-check pulse oximetry monitoring
• Supports a robust data set, including real-time SpO2 and PR values, SatSeconds alarm management, pleth waveform, blip bar and tabular trend data
• Supports Sleep Study Mode, which enables the clinician to dim the LCD display and silence alarms to prevent disruption of patients’ sleep
• Nellcor™ advanced signal processing technology delivers reliable operation even in difficult monitoring conditions

Additional Information:

• Item Code: NellcorMedtronicPM10NPulseOximeter
• Production Capacity: 20
• Delivery Time: 3
• Packaging Details: Box Packing

The Bionet Oxy9Wave Neonatal Pulse Oximeter is a cutting-edge medical device designed for precise monitoring of oxygen saturation levels and pulse rates in neonates and infants. This advanced pulse oximeter offers a range of features to ensure accurate readings and ease of use in neonatal care settings.

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

Specifications:

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Contec CMS70A Portable Tabletop Pulse Oximeter Features:

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers

Additional information

Additional Information:

• Production Capacity: 20
• Delivery Time: 1 Week
• Packaging Details: Box Packing

Specifications:

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Contec CMS70A Portable Tabletop Pulse Oximeter Features:

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers

Additional information

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 Week
• Packaging Details: Box Packing

Technical Specifications: 

• Display Mode: TFT Screen and LED display
• Screen Resolution: 320*240
• SpO2 Measuring Range: 0%~100%(the resolution is 1%)
• Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
• PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
• Accuracy: ± 2bpm or ± 2% (select larger)
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
• Power Consumption: About 350mA
• Voltage: AC 100~240V, 50/60HZ
• Power Supply: Built-in recharge Li-Polymer
• Battery working hour: After the device built-in battry finished the charge, it’s continuous working time is not less than 1 hour
• Safety Type: II device, BF Type

Features: 

• Low power consumption
• SpO2 value display
• Pulse rate value display, bar graph display
• PI display
• Pulse waveform display
• Menu operation
• Screen brightness can be changed
• The display mode can be changed
• Pulse rate sound indication can be turned on or turned off
• With measured data overruns, limits and low-voltage alarm function, the upper/down alarm range can be adjustable
• Battery capacity indication, Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage and with alarm function
• Connected with an external oximeter probe
• Data storage function, and the storage data can be uploaded to a computer
• Real-time data can be transmitted to computers

 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 Week
• Packaging Details: Box Packing

The Masimo Rad-97 Pulse CO-Oximeter® represents a groundbreaking innovation in patient monitoring, offering an extensive profile of noninvasive parameters in a single, patient-centric monitor. Designed for versatility, it efficiently gauges oxygen saturation, pulse rate, and other critical metrics, providing caregivers with real-time insights into patient well-being.

Key Features

• Proprietary Masimo SET® technology for reliable readings amidst challenges.
• Intuitive user interface with clear visuals and easy navigation.
• Flexible configurations are tailored to meet diverse clinical needs.
• Enhanced patient safety with real-time data and instant alerts
• Compatibility with multiple sensors for broad applications

Additional Information:

• Production Capacity: 30
• Delivery Time: 1 Week
• Packaging Details: Box Packing